Product

Mixer
High Speed Mixer & Granulator
High Speed Mixer & Granulator

High Speed Mixer & Granulator

Introduction
Mixing, Kneading, Granulation, Rectification are completed in a same container. The vertical granulation has excellent basic structure, function and safety. The diameter of grain is even and entire grains are globe-like. It could reach the purpose of granulation of the range from fine grain to large grain.


Features
Features
  • Globe-like fine grain can be obtained
    The stirring leaves are fitted in the bottom of mixer, and high-speed cutters are equipped at top of the side-vertical barrel wall. When powder and liquid additives are turned round upward along the centrifugal force of barrel wall, and directed to center then drop that repeated turn, compression and cutting, the function of granulation could be achieved.
  • High-precision mixture could be conducted in a same machine
    High-precision and strong mixture could reach the dispersed and even effect about 30 seconds to several minutes.(As for the micro liquid additives could reach to the 1/20,000 mixture precision.)
  • Extensive operation conditions could adjust various kinds of granulation
    Within 20-200-mesh diameter of grain, no matter fine grain, or grains formed by grains and powder metallurgy could be selected.
  • Compact assemblies
    The gap between stirring wings and mixture tank is very small, and no dead space; it could completely stirring, mixture and discharge.
  • Easy removal and clean, meeting the Requirements of GMP
    Easy removal of cutters and stirring wings, the part of shaft seal has been protected by air current circuit too that could be cleaned by water completely after use.
  • Various stirring wings could be selected for different purposes of granulation
    According to the angle, shape and the rotational speed of stirring wings, could make selection and match depending on the characteristics of raw materials, in order to prevent form adherence, or collapse of fragile grains.

Specification
Specification
HMG-01 ~ HMG-3000
Type HMG-
25		 HMG-
50		 HMG-
100		 HMG-
200		 HMG-
400		 HMG-
600		 HMG-
800		 HMG-
1000		 HMG-
1200		 HMG-
1500		 HMG-
2000		 HMG-
2500		 HMG-
3000
All Volume (liter) 25 50 100 200 400 600 800 1000 1200 1500 2000 2500 3000
Effective Volume
(liter)		 15 30 60 120 240 360 480 600 720 900 1200 1500 1800
Mixer(HP) 5
7-1/2 15 20 30 40 50 60 75 100 120
Granulater (HP) 2(2P) 3(2P) 5(2P) 7-1/2(2P) 10(2P) 15(4P) 20(4P) 25(4P) 30(4P) (4P)X2
Mixer (rpm) 30~600 25~500 210 170 130 120 110 100 90 85 80 70
Granulater (rpm) 3000~3600(50/60Hz)
 3000~3600
(50/60Hz)		 1500~1800(50/60Hz)
Shell (mm) 400 500 640 800 1000 1150 1260 1370 1450 1560 1720 1860 2000
Width (mm) 900 750 1520 1720 1930 2250 2360 2560 2550 2660 2840 2910 3180
Length (mm) 1450 1600 1530 1800 2100 2400 2550 2750 2950 4450 4600 4930 5100
Height (mm) 1200 1550 1330 1500 2400 2620 2820 3040 3090 3170 3530 3630 3500
Flow-Sheet
Flow-Sheet

Application And Capability
Application And Capability
  • Globe-like fine grain can be obtained
    The stirring leaves are fitted in the bottom of mixer, and high-speed cutters are equipped at top of the side-vertical barrel wall. When powder and liquid additives are turned round upward along the centrifugal force of barrel wall, and directed to center then drop that repeated turn, compression and cutting, the function of granulation could be achieved.
  • High-precision mixture could be conducted in a same machine
    High-precision and strong mixture could reach the dispersed and even effect about 30 seconds to several minutes.(As for the micro liquid additives could reach to the 1/20,000 mixture precision.)
  • Extensive operation conditions could adjust various kinds of granulation
    Within 20-200-mesh diameter of grain, no matter fine grain, or grains formed by grains and powder metallurgy could be selected.
  • Compact assemblies
    The gap between stirring wings and mixture tank is very small, and no dead space; it could completely stirring, mixture and discharge.
  • Easy removal and clean, meeting the Requirements of GMP
    Easy removal of cutters and stirring wings, the part of shaft seal has been protected by air current circuit too that could be cleaned by water completely after use.
  • Various stirring wings could be selected for different purposes of granulation
    According to the angle, shape and the rotational speed of stirring wings, could make selection and match depending on the characteristics of raw materials, in order to prevent form adherence, or collapse of fragile grains.

Loading...
Contact Us